Demco 800 BUSHEL Especificações descarregar pdf (Página 2)

Page 2

GENERAL INFORMATION

1. Unless otherwise specified, high-strength (grade5) (3

radial-line head markings) hex head bolts are used

throughout assembly of this piece of equipment.

2. Whenever terms "LEFT" and "RIGHT" are used in this

manual it means from a position behind wagon box and

facing forward.

WARNING: TO AVOID PERSONAL INJURY OR DEATH, OBSERVE FOLLOWING

INSTRUCTIONS:

Never overload wagon. Do not exceed the rating of the gear or load rating of the tires,

whichever is less.

Ensure that anybody present is clear before applying power to any machinery used in

conjunction with wagon box or when moving box.

Never allow anyone in, near, or on gravity box during transporting or unloading of grain.

Moving grain is dangerous and can cause entrapment, resulting in severe injury or death

by suffocation.

Do not exceed 20 miles per hour when towing wagon.

Table of Contents

General information ...................................................................................................... 2

Bolt Torque ................................................................................................................... 2

Safety Sign Locations .................................................................................................. 3

Running Gear Parts Breakdown................................................................................... 4

Running Gear Parts List and Assembly Instructions ................................................... 5

Brake Tongue Maintenance and Adjustment ................................................................ 6

Brake Tongue Parts Breakdown and Parts List ............................................................ 7

13î Brake Cluster Parts Breakdown and Parts List ..................................................... 8

Running Gear Brake Line Parts Breakdown and Assembly Instructions..................... 9

Brake System Maintenance and Repair....................................................................... 10-11

Gravity Flow Box Parts Breakdown ............................................................................. 12

Gravity Flow Box Assembly Instructions and Parts List ............................................. 13

Maintenance and General Operation ........................................................................... 14

Gravity Box to Running Gear Assembly Instructions and Parts List ........................... 14

Gravity Flow Light Kit Parts Breakdown, Parts List, and Wiring Schematic ............... 15

Thank you for purchasing a Demco Gravity Flow Wagon. We feel you have made a wise choice and hope you are

completely satisfied with your new piece of equipment. Proper care and use will result in many years of service.

INTRODUCTION

3. When placing a parts order, refer to this manual for

proper part numbers and place order by PART NO.

and DESCRIPTION.

4. Read assembly instructions carefully. Study

assembly procedures and all illustrations before you

begin assembly. Note which parts are used in each

step. This unit must be assembled in proper sequence

or complications will result.

Torque figures indicated are

valid for non-greased or non-

oiled threads and heads unless

otherwise specified. Therefore,

do not grease or oil bolts or

capscrews unless otherwise

specified in this manual. When

using locking elements,

increase torque values

by 5%. *GRADE or CLASS value

for bolts and capscrews are

identified by their head

markings.

Torque Specifications

GRADE-2 GRADE-5 GRADE-8

Bolt Torque for Metric bolts *

CLASS 8.8 CLASS 9.8 CLASS 10.9

ìAî lb-ft (N.m) lb-ft (N.m) lb-ft (N.m)

6 9 (13) 10 (14) 13 (17)

7 15 (21) 18 (24) 21 (29)

8 23 (31) 25 (34) 31 (42)

10 45 (61) 50 (68) 61 (83)

12 78 (106) 88 (118) 106 (144)

14 125 (169) 140 (189) 170 (230)

16 194 (263) 216 (293) 263 (357)

18 268 (363) -- -- 364 (493)

20 378 (513) -- -- 515 (689)

22 516 (699) -- -- 702 (952)

24 654 (886) -- -- 890 (1206)

BOLT TORQUE TORQUE DATA FOR STANDARD NUTS, BOLTS, AND CAPSCREWS.

Tighten all bolts to torques specified in chart unless otherwise noted.

Check tightness of bolts periodically, using bolt chart as guide. Replace

hardware with same grade bolt. NOTE: Unless otherwise specified,

high-strength Grade 5 hex bolts are used throughout assembly of equipment.

Bolt Torque for Standard bolts *

GRADE 2 GRADE 5GRADE 8

A lb-ft (N.m) lb-ft (N.m) lb-ft (N.m)

1/4 6 (8) 9 (12) 12 (16)

5/16 10 (13) 18 (25) 25 (35)

3/8 20 (27) 30 (40) 45 (60)

7/16 30 (40) 50 (70) 80 (110)

1/2 45 (60) 75 (100) 115 (155)

9/16 70 (95) 115 (155) 165 (220)

5/8 95 (130) 150 (200) 225 (300)

3/4 165 (225) 290 (390) 400 (540)

7/8 170 (230) 420 (570) 650 (880)

1 225 (300) 630 (850) 970 -(1310)

8.8

CLASS 8.8

10.9

CLASS 10.9

9.8

CLASS 9.8

1 2 3 4 5 6 7 ... 15 16

Comentários a estes Manuais

Sem comentários

Demco 800 BUSHEL Especificações Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com não Demco 800 BUSHEL